How to remove unnecessary programs from startup. How to remove unnecessary programs from Windows startup to speed up computer startup Removing from startup

Extra programs interfere with the user every time the computer is started. You have to wait and waste time, and sometimes they are simply not needed at all. I will provide instructions on how to disable them. This will significantly reduce the boot time of your computer.

Attention! Some programs may go back to autoload when you turn them on ( e.g. utorrent).

To avoid this, you need to check their settings and remove autoload.

You can see all the methods not only in the article, but also in the video. Everything is clearly shown there. However, there are some nuances in the article.

Disable via start menu

There is a special folder that contains files that run every time the computer is turned on. Usually programs are added there themselves during installation if it is configured in them. They may not be here, but it's still worth checking.

Go to Start >> All Programs >> Startup. And delete the extra ones by right-clicking and delete.

In this example, only skype is launched from this folder. Only the main programs located in this folder are displayed here. To turn off the rest ( usually they are in the registry) is better to use other methods.

Disabling autoload in system configurations

All popular versions of Windows have a built-in utility for managing the system. With it, you can simply disable autoload by unchecking the checkboxes. This is usually enough to solve the problem.

You need to open a command prompt. Go to Start >> Run ( Win+R) and enter msconfig as in the image below.

Select the "Startup" tab and uncheck unnecessary programs. I automatically download the program and antivirus.

After that, you will be prompted to restart your computer. This can be done later. There is absolutely no way to remove everything. Only the most basic ones. If this is not enough for you, then see the following methods.

Disable in CCleaner

Unlike the methods above, here you can disable autoload for applications. First, download the free Ccleaner program, install and run. Select the "Service" category and the startup tab. Turn off or remove unnecessary programs as shown in the image below. I left only the antivirus.

Disabling makes the task for autoload inactive, and deleting it completely removes it. However, programs can still add the task themselves even after using delete.

Disabling in the registry

Everything here is done by hand. If you do not want to do it by hand, then go to the next method. There it is much easier.

In the progress line write regedit and go through the directory:

1. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

Then a list of tasks for autoloading will appear. Each line will refer to a separate program. Delete the extra ones as in the image below.

Take a closer look at the path:

1. HKEY_LOCAL_MACHINE - branch for all users.
2. HKEY_CURRENT_USER - The branch for the user you are currently logged into.

If this is not enough, then the following method should help.

Shutdown with the autorun utility

The utility allows you to conveniently work with the registry and disable autoload in just 1 click. Its capabilities include disabling not only programs, but also various dll libraries, system services, device drivers, and in general everything that loads automatically. Download it and. Installation is not required.

Run the autoruns or autoruns64 file depending on your system version and accept the license agreement. Other files run it on the execution line.

Now you will see its interface. Here, select the "Everything" tab and simply uncheck the unnecessary programs. All possible startup objects will be shown here.

Remove only what you know! Disabling important system libraries or services can make your computer unstable.

After that, just close the utility. There is no need to save anything. She will correct the values ​​in the registry immediately after adding or removing a checkmark. You don't have to do anything manually.

It also highlights rows with different colors:

1. Yellow - available in startup tasks, but no files found. They cannot start automatically.
2. Red - files without a description and without an author. It could be viruses but not always so).

Information about the file is displayed below. Weight, location and more. Separate tabs indicate the location of objects. You can tinker and turn off a lot of superfluous and unnecessary ( everyone individually). The main thing is to read about what you turn off.

How many startup programs do you have?

The personal computer can rightly be considered the most common computer technology. Most computers run on the Windows operating system from Microsoft. This system is popular among both software developers and ordinary users.

Unfortunately, not all users have fully mastered such a complex tool. Many functions that directly affect , remain unattended.

Programs in Windows startup

If your computer starts to run slower over time, you should investigate the cause of the problem. First of all, a person should pay attention to loading system parameters. If the central processor, hard drive and RAM are loaded by no more than 20%, most likely the problem is a virus or a failure of some part. If, however, one of the parameters is 100% loaded, you need to find out which processes are consuming system resources.

Most often, this situation occurs when there are too many applications in startup. Of course, programs such as video cards, virtual disks, and antivirus software should be loaded with Windows to keep the machine from getting into it with malware. However, along with useful applications, at startup, there are often completely useless tools.

In addition to the fact that programs work in the background from the very moment the computer is turned on, they significantly slow it down at startup, moreover, an increase in peak load when loading Windows can even negatively affect the physical parameters of the machine.

However, the most dangerous thing about automatically loading applications is that malicious software can also be loaded along with Windows. If a virus is launched before the antivirus software is loaded, it can damage any media or system file in Windows. Let's see how to remove unnecessary programs from Windows startup.

The Windows 7 operating system was released a long time ago, then it was replaced by Windows 8, then 8.1 and finally Windows 10. However, the seventh version is still one of the leading editions of operating systems from Microsoft.

To check which applications are automatically launched at startup, you must press a combination of two keys Win+R. In the "Run" window, a person enters the name of the msconfig program and clicks "OK", the msconfig program, if desired, can be found in the folder System32.

In the window that appears, you need to go to the "" tab and turn off (uncheck) unnecessary programs.

When you disable one or another application, the program itself will work as before, only now, it will not start from the OS. However, disabling some programs remains at the discretion of the user, for example, disabling , will lead to the fact that a person will simply forget to run the program, and therefore, files put on “download” will not be downloaded, and distributions will not be distributed.

In addition to disabling autoload from " System Configurations", there is another way. Each program that supports autoloading has an option in the settings such as " Run an application along with Windows". Sometimes, it is enough for a person to simply uncheck this item during installation and the program will not start at startup.

Despite a fairly simple way to remove programs from startup in a system way, for some users, this still remains a difficult task. And in fact, not every user will be able to do this procedure without prompts from the Internet.

CCleaner offers an easier way to remove software from startup. To do this, just go to the "" tab and select the desired application. The next step, the person presses the " Switch off" or " Delete". It is advisable to turn it off, because in the future, the user will be able to turn it on again.

How to disable startup programs in Windows 8 and Windows 10

If Windows 8 or later is installed on the user's computer, all of the above methods do not make any sense, because Microsoft has dramatically simplified this procedure by integrating the function of disabling applications from startup in the task manager window.

Thus, in order to remove an extra program, a person holds down Ctrl + Shift + Esc and gets into " Task Manager". The next step, the user opens the tab "" and right-click disables any application.

As a result, any user can disable programs from startup, and yet, without a search engine, hardly anyone will understand all the applications that start with Windows, because along with third-party programs, the necessary service applications from operating system.

As for the simplified work with startup in Windows 8, this proves once again that the reluctance to update the system to a newer version is nothing more than prejudice. The newer the system, the more simplified the interface it has.

Share.

Today, almost any installed program adds itself to startup. That is, it starts when you turn on your computer or laptop. What's bad about it? It's simple: the more you type, the slower your PC or laptop will turn on. And if there is not enough RAM, it will fail and slow down. Accordingly, in order to prevent this, and at the same time optimize the operation of the computer, you need to disable autorun programs in Windows. Not necessarily all - it is enough to remove only the extra ones and those that you rarely use.

How to turn off autorun programs in Windows XP

1. Open "Start" and select "Run".
2. In the window that appears, write msconfig and press Enter.
3. In the new window, go to the "Startup" tab and uncheck unnecessary items.

It's so easy to remove unnecessary programs from startup. After changing the settings and clicking the "OK" button, the system will ask you to restart your PC or laptop. It is not necessary to do this, but it is desirable.

If, after restarting the computer, you find that some software is missing, you can always open this window again and check the necessary items.

How to disable startup programs in Windows 7

The same method works on the "seven". He's just a little different.

What startup programs can be disabled? Preferably only those that you know. If the name of the program is unfamiliar to you, it is better not to touch it. Some of them are service and are needed for the normal operation of a computer or laptop. And if you turn them off, the consequences can be unpredictable.

To do this, go to Start - All Programs - Startup.

This is where the software is displayed, which is loaded when the computer is turned on (but the list is likely to be incomplete). And to remove it from startup, just delete the extra items (i.e. right-click - Delete).

Startup management in Windows 8 and 10 operating systems is carried out through the device manager

Accordingly, to disable autorun programs in Windows 10 or 8:

1. Press Ctrl+Shift+Esc keys.
2. Click More.
3. Click the "Startup" tab (or "Startup" if you have an English version).

Finally, as promised, I will give universal tips on how to set up autoload in any version of Windows. This is done with the help of additional software.

For example, you can clean up startup using CCleaner. This is an excellent software that removes various garbage and optimizes the computer. So, to remove auto-start programs when you turn on your laptop or PC:

1. Launch CCleaner.
2. Go to the "Service" tab.

The software that is loaded with the OS is displayed here. Highlight the desired item and click the "Turn off" button (or double-click on it).

You can also switch to other tabs - for example, Google Chrome. All plug-ins (extensions) included in your browser are displayed here and, if necessary, you can disable unnecessary ones.

You can also remove unnecessary programs from startup in Windows using the excellent Auslogics BoostSpeed ​​utility, which is designed to optimize PC performance. To do this:

1. Run her.
2. Go to the "Tools" tab.
3. Select "Autostart".

And then everything is simple: select the necessary items and remove the checkmarks. If necessary, you can click on the line "Show additional. elements”, after which the list of applications will increase several times. But remember - turn off only what you know.

Many of them brazenly, without the permission of the user, climb into startup and can automatically start again when the computer is turned on, even after performing the above manipulations. In this case, you need to go to the software settings and uncheck the corresponding box.

To make it clearer, I will show how this is done using the example of the well-known Skype messenger.

Ready. Skype will no longer open when you turn on the PC, and you do not need to go into the Windows settings or use additional software for this. Similarly, you can disable autorun of any program.

True, this procedure will be slightly different. The desired item can be located anywhere and be called differently, but the essence is about the same.

Some programs after installation strive to run with the system. This can be inconvenient: extra tray icons next to the clock are annoying, and some programs "pull the blanket over themselves", consuming resources. Today the Country of Soviets will tell you how to remove unnecessary programs from startup.

If the startup programs do not bother you, you can leave everything as it is. However, you may need to remove programs from startup in the following cases:

1. The operating system loads too slowly due to the large number of programs that start at system startup.
2. The computer “slows down” during operation, because running programs “eat up” the RAM necessary for the normal functioning of really necessary applications.

An easy way to remove programs from startup

There are two ways to remove unnecessary programs from startup - standard (for ordinary users) and "advanced". To remove programs from startup in a simple way, click on the "Start" button and select the "Run" menu item. In the dialog box that appears, write msconfig, then press the OK key. A window with several tabs will open, you need to select the "Startup" tab.

This tab will contain a list of programs that start automatically at system startup. In the first column ("Startup Item") there will be a list of programs that start or started when Windows started. Those programs that run in automatic mode will be marked with checkmarks.

Sometimes, by the name in the first column, it is quite difficult to understand which program is meant. If you have any doubts about a particular application, pay attention to the "Team" column. It contains the path of the executable file, which will help you determine the folder and, accordingly, the name of a particular program. If the path is not completely visible, you will need to drag the separator between the "Location" and "Command" columns to the right using the mouse cursor.

To remove unnecessary programs from startup, simply uncheck the boxes next to their names. Unnecessary are those programs that are not needed all the time, but are periodically launched using a shortcut. Those programs that you use often and that do not require a lot of resources can be left at startup. It is strongly not recommended to remove antivirus and firewall from startup!

Uncheck the box next to unnecessary programs, click the "Apply" button, and then OK. After that, a dialog box will appear - the system will warn you that all the changes made will take effect only after the computer is restarted. You can restart the computer immediately by clicking on the "Restart" button, or not restart - then click the "Exit without restarting" button.

If you accidentally removed the wrong programs from autoload, you can return to the autoload setting again and check the necessary checkboxes.

Editing autoload through the registry

You can also remove unnecessary programs from startup by editing the registry. Attention: if you do not know what a registry is, or you know, but are not sure that you can do everything correctly, do not use this method!

To access editing the registry, we call the Run dialog box (exactly the same as in the first method), but instead of the msconfig command, enter the regedit command. After executing this command, a program will open that is somewhat similar to Windows Explorer. On the left side you will see a registry tree showing its structure, and on the right side you will see the keys that are contained in the active (selected by you) registry key.

Information about startup is contained in two branches of the registry:

• - information about startup programs for all users of the system
• - information about startup programs for the current user of the system

To remove an unnecessary program from startup, delete the corresponding key (right-click on the key - select the "Delete" context menu item).

You can also remove unnecessary programs from startup using special third-party utilities. As you can see, removing unnecessary programs from startup is quite easy if you know how. And now you know!

Automatic inclusion of programs at Windows startup is a very useful option when it comes to essential programs. The user frees himself from the routine operations of launching one by one (clicking on shortcuts) to open network clients, instant messengers, a text editor. Everything you need is loaded immediately - the computer is configured to work the way the user wants, and without his participation.
Comfortable. Definitely.

But, if there are too many programs at startup, certain difficulties arise:

• the computer starts much longer;
• the system “slows down” due to programs that are launched automatically and “hang” in the tray;
• wasteful consumption of computer hardware resources: some applications from autorun are enabled, but the user rarely accesses them.

In this review, we will talk about how to disable autorun programs in Windows using built-in and third-party tools.

Program settings

When you want to deactivate the autorun of a particular application, the first thing to look at is its settings. Many programs provide an option to disable autoload.

Let's consider shutdown with specific examples:
In the uTorrent torrent client: Menu → Settings → Program settings → General → “Run ... with Windows” option (you need to remove the “bird” in the window)

To remove the Skype messenger from startup, in its menu, open:
section "Tools" → Settings → General settings → the function "Run ... at Windows startup" (uncheck the box in the line with a mouse click).

Regular option

In the "System Configuration" system panel, Windows provides the user with the ability to independently disable autorun programs. This procedure is performed in just a few mouse clicks:

1. Click the "Start" button on the taskbar.

2. In the search menu bar, type -msconfig. Press "Enter".

3. In the System Configuration window, click the Startup tab.

4. In the list, remove the "birds" next to utilities, programs, game applications, the launch of which you want to deactivate.

5. Press the "Apply" and "Ok" buttons in succession.

Registry editing

Intervention in the system registry in order to remove programs from startup is required when, for some reason, the msconfig option and third-party tools cannot be used. Editing requires the user to have certain skills and experience in the registry editor. For with incorrect actions during the execution of the procedure, you can disable the system.

To remove autoload keys, do the following:
1. Press Win + R together on your keyboard.

2. In the line "Open" type the directive - regedit. Click "OK".

3. If you want to disable automatic launch of the software for all accounts, open the "branch":
HKEY_LOCAL_MACHINE → SOFTWARE → Microsoft → Windows → CurrentVersion → Run

To configure autoload in the current account:
HKEY_CURRENT_USER → Software → Microsoft → Windows → CurrentVersion → Run

4. In the second panel of the editor (Name/Type/Value), right-click on the key of the desired application and select "Delete" from the menu. After activating the command, it will be removed from the startup list.

Folder "Startup"

1. Open the Start menu. Scroll down the list a little.

2. Locate the "Startup" folder. Right click on it and select "Open".

3. In the window that appears, remove the shortcuts of unnecessary programs: using the context menu (the "Delete" option) or by dragging them to the "Trash".

Special programs

You can also remove a program from startup with special maintenance utilities. This approach has certain advantages: no need to learn OS settings, quick access, convenient alternative interface, etc.

Here are two popular special utilities that allow you to remove a program from startup.

CCleaner is a cleaner program. Its main functional task is to clean up file directories and the registry from software garbage. But among its additional options is the Windows autorun configuration. A free version of the CCleaner distribution can be downloaded from ccleaner.com.

After launching and installing the program, follow the steps described below:

1. Click the icon of the "Service" section. In the submenu (adjacent column), click "Startup".

2. Select in the list by clicking the application that you want to remove from automatic launch.

3. Press one of the buttons:

• "Turn off" - temporary deactivation;
• "Delete" - complete removal from the list.

Autoruns is an advanced tool for managing modules, services, processes and system startup. Developed by Sysinternals and acquired by Windows Developers (Microsoft Corporation). Fixes all running program objects in the system. Recommended for experienced users.

To set up autorun with Autoruns:
1. Go to the official download page - https://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

3. Extract the archive:

• right-click on the volume of the Autoruns archive;
• option in the "Extract to Current Folder" menu.

4. After unzipping is complete, run the autoruns.exe file.

5. In the utility window, go to the "Everything" tab.

6. In the "... CurrentVersion \ Run" registry keys, uncheck the boxes next to the programs that you want to remove from startup.

7. Upon completion of the procedure, close the utility, restart the computer and check the changed autorun setting.

Viruses in startup

Many viruses (browser hijackers, miners, adware, etc.) "prescribe" in the system bootloader. And in some cases, their automatic start cannot be disabled either by regular system tools or by third-party utilities. After being turned off by the user at startup, they still turn on again.

That's why in case of a virus infection, it is necessary to use anti-virus tools to debug autoload.

The most effective in solving such problems:

A tiny but extremely useful virus scanner. It is able to destroy pests not only in the autorun list, but also in browsers, programs, and the system registry.

It is distributed free of charge on the website https://ru.c/adwcleaner/.

After launching and completing the AdwCleaner update, click "Scan" in its panel. Then delete the found virus objects and restart Windows.

Rescues with a strong virus infection of the PC. Able to find malware that remains invisible to the main antivirus running in the system. Successfully detects many types of digital infections (worms, Trojans, rootkits).

To download the scanner, use the "Free Download" button on the page https://ru.malwarebytes.com/. Scanning is started in the Scan menu: Scan mode selection → Settings (if necessary) → Start.

Regularly check your system startup settings. Especially after installing new software, games. Disable automatic launch of rarely used, unnecessary programs. Otherwise, they will consume computer resources without any benefit. And on low-power systems, they can cause crashes, slowing down Windows.

Successful PC setup and comfortable use of the operating system!